Monsoon would be the months right from around Spring towards November, with rains lots on The land of india. The very significant elements is going to provide puddles, bogs and in some cases water, that make the significant conditions belonging to the digger machines harsh and even confusing. Besides, the very elements is going to corrosion the very segments and even cause damage to the sewing machine. So that they can more beneficial provide the machines and create it all build maximum work flow on moist days or weeks, down the page regulations should really be found out and even commemorated.
1. Park the machine in dry place
In rainy days, the machine should be parked in clean and dry garage. All of the structural parts should be lubricated to avoid rust and the excavator machine should be started at least once per month if it is idle for long time.
2. Timely clean and overhaul
The machine should be cleaned in time after working in rainy days to remove the dirt and avoid rust. The lubricating oil and fuel oil should be protected well from being contaminated by rain. Check the filters to avoid rain entering and causing blocking. Replace the parts that are seriously damaged.
3. Install anti-skid chains
The anti-skid chains should be installed for the wheeled excavator, which can greatly increase the grip of the machine. The size of the anti-skid chains should match with that of the tires. And the machine should travel with sufficient tire pressure in low speed to avoid causing damages to the anti-skid chains.
4. Pay attentions to the road condition
The machine should be operated with low speed since the ground is wet and slippery after rain. Avoid approaching the edge of trenches or cliffs, where the earth is soft and the machine may fall down or tip over. With the friction coefficient decreasing, the excavator machine should be kept stable by reducing the speed, which can minimize the damage caused by slip to the machine.